The Mother Load

Keep harvest moving, keep grain flowing. A high-capacity chaser bin built to buffer your header while trucks are on the road — in 105, 135 and 160 tonne models.

  • Image6
  • Image3
  • Image 1
  • Image6
  • Image3
  • Image 1
105–160T
Tonne Model
Capacity range
 
10T/MIN
Max unload rate
 
600MM
Ground Clearance
 
10YR
Structural
Warranty
The Mother Load

Keep harvest moving. Keep grain flowing.

When Harvest Is Running At Full Pace, Every Minute Matters. The OZTEC Mother Load Gives You The High-Capacity Grain Buffer You Need To Keep Grain Moving While Trucks Are On The Road Or Away From The Paddock.

Built From OZTEC's Proven Chaser-Bin Engineering, The Mother Load Combines High Capacity, Fast Unloading And Heavy-Duty Construction To Handle The Demands Of Australian Harvests.

Available In 105, 135 And 160 Tonne Models, It Gives Farmers The Capacity To Match Their Operation.

The Mother Load

Built For Faster Grain Transfer

The Mother Load Features A 19-Inch (483mm) Hydraulic Discharge Auger And Unloading Rates Of Up To 10 Tonnes Per Minute, Helping You Move Large Volumes Of Grain Quickly And Efficiently.

A Large Expansion Chamber Helps Maintain Smooth Grain Flow, While Independent Floor Gates Give You Greater Control During Unloading.

The Mother Load

Built For Tough Paddock Conditions

When Conditions Get Difficult, The Mother Load Is Designed To Keep Working. Its Hydraulic Squat System Lowers The Chassis To Spread The Load And Help Reduce Soil Pressure And Tyre Stress.

With Up To 600mm Of Ground Clearance, An Articulated Drawbar And 465mm Super-Single Tyres, The Mother Load Is Built To Handle Uneven Paddocks, Ridges, Washouts And Tight Turning Areas.

Built Strong. Built To Last.

The Mother Load Uses A Heavy-Duty 200 x 100 x 6mm RHS Truss Frame, 4mm Funnel Sheets And 6mm Structural End Walls For Strength And Durability.

High-Tensile Huck-Bolted Panels And Fully Seam-Welded Critical Areas Provide Added Protection Against Moisture, Corrosion And Long-Term Wear. The Machine Is Also Backed By A 10-Year Structural Chassis Warranty.

The Mother Load

Designed Around The Farmer

The Mother Load Is Designed To Make Everyday Operation Easier, From Loading And Unloading To Cleaning And Inspection.

Mother Load Brochure Cover
Download The
Mother Load
Brochure
Download The Mother Load
Brochure Specification and Detailed Equipment Guide

Frequently Asked Questions

What capacities is the OZTEC Mother Load available in?

The Mother Load is available in three capacities: 105 tonnes, 135 tonnes and 160 tonnes, with bin lengths of 12.0, 15.0 and 18.0 metres respectively.

How fast can the Mother Load unload?

The Mother Load can unload at up to 10 tonnes per minute. A full 160-tonne load can be unloaded in approximately 16 minutes.

What tractor horsepower is required?

The minimum PTO requirements are 75 HP for the 105-tonne model, 90 HP for the 135-tonne model and 110 HP for the 160-tonne model.

How does the Mother Load help reduce soil compaction?

The hydraulic squat undercarriage lowers the bin flat onto the ground when stationary, spreading the load over a larger area and helping reduce soil pressure, tyre stress and soil compaction.

How much ground clearance does the Mother Load have?

The hydraulic suspension can raise the chassis to provide up to 600mm of ground clearance, helping the bin move through washouts, ridges, gullies and uneven paddocks.

What type of unloading auger does the Mother Load use?

The Mother Load uses a 19-inch (483mm) inclined auger designed to provide fast and controlled grain transfer. Its unloading system is based on OZTEC's proven chaser-bin engineering.

Can the Mother Load blend different grain moisture levels?

Yes. The independent hydraulic floor gates allow grain to be drawn from different areas of the bin during unloading, allowing dry and wet grain to be blended.

How quickly can the Mother Load be cleaned out?

The cleanout system allows the bin to be fully cleaned in as little as 30 seconds. Three over-centre handles provide quick access to the cleanout doors.

Can the Mother Load be operated by one person?

Yes. The Mother Load is designed for single-operator control, with the unloading and hydraulic systems designed for simple operation.

How does the Mother Load handle uneven paddocks?

The hydraulic articulating drawbar helps the bin move over gullies, ridges and uneven ground. The centralised wheel group also improves manoeuvrability and allows tighter turns.